Armorcoat Epoxies
Armorcoat 1300
Armorcoat 1300 is a two-component 100% solids epoxy coating designed for applications where a high-build impact resistant floor coating or overlay is needed: Armor-Rock, Armor-Rock THX Smooth, Armor-Rock THX Non-Slip. Very good resistance to UV exposure. Armorcoat 1300 meets all of the USDA guidelines for use in federally inspected poultry and meat plants. Accepts VSC Color Additives.
Armorcoat 1000
Armorcoat 1000 is a 100% solids, 2-component, epoxy coating designed for durability, longevity, and very good resistance to UV exposure. Armorcoat 1000 meets all of the USDA guidelines for use in federally inspected facilities. Armorcoat 1000 is available in clear, medium gray. Accepts VSC Color Additives.
Armorcoat Fast
Armorcoat Fast is a 100% solids, 2-component, fast-set epoxy coating designed for durability, longevity, and has fairly good resistance to UV exposure. Armorcoat Fast meets all of the USDA guidelines for use in federally inspected facilities. Armorcoat Fast is available in clear, medium gray. Accepts VSC Color Additives.
Armorcoat Xtra Fast
Armorcoat Xtra Fast is a 100% solids, clear extra fast-set 2-component, epoxy coating designed for durability, longevity, and resistance to chemicals. Aarmorcoat meets all of the USDA guidelines for use in federally inspected facilities. Armorcoat is available in clear, and a selection of colors using VSC colorants.
Armor-Prime
Armor-Prime Clear is a two-component 100% solids epoxy formulated to prevent off-gassing in concrete and to provide superior adhesion to concrete. It contains zero VOC’s and meets USDA guidelines.
Armorcoat UV
Armorcoat UV comes from a new generation of epoxy formulations that exhibits ‘Ultimate’ color and gloss retention (even in exterior applications). Armorcoat UV is a two-component 100% solids epoxy coating designed for applications where superior UV protection over color quartz, flake, stain (and other decorative floors) is needed. Armorcoat UV meets all of the USDA guidelines for use in federally inspected facilities.
Armorcoat CR
Armorcoat CR is a 100% solids, 2-component, novolac formula designed for environments that require a high degree of chemical or temperature resistance. Armorcoat CR meets all of the USDA guidelines for use in federally inspected facilities. Armorcoat CR is available in clear, medium gray and a selection of colors using VSC COLORANTS with clear. Light colors and clear will darken with UV exposure.
Armorcoat WB
Armorcoat WB is a unique true “water-based”, high solids pigmented epoxy coating that offers excellent adhesion and abrasion resistance. It outperforms and outlasts most solvent-based sealer systems without the associated odors, flammability, or VOC’s. Armorcoat WB meets all of the USDA guidelines for use in federally inspected facilities.
Armor-Flex Membrane
Armor-Flex Membrane is a two-component, 100% solids and 100% reactive specialty epoxy resin combination that cures to a semi-flexible membrane with approximately 100% elongation. Armor-Flex Epoxy meets all of the USDA guidelines for use in federally inspected facilities. It is available in clear and a selection of colors using VSC Colorants. Armor-Flex can also be used as a flexible Armor-Grit or Armor-Rock system.
Armorcoat 65
Armorcoat 65 is a two-component solvent-based epoxy coating that exhibits excellent characteristics for abrasion resistance, chemical resistance and substrate penetration. This product is suitable as a primer for high build coatings and urethane or as a stand-alone coating.
Armorcoat Supra
Armorcoat Supra is a unique blend of high solids pigmented epoxy that offers excellent adhesion and abrasion resistance. It outperforms and outlasts most solvent-based sealer systems without the associated odors, flammability or VOC's.